1) Assemble your kit, hook up your Revo to your TV for audio or sound, i use the VGA and standard audio out, but there's HDMI there too, either way you'll get the full 1080p presuming your TV can handle the resolution.
2) Install Ubuntu. The cheaper Revo comes with Linux Linpus installed, I created a Live USB of Ubuntu 10.10 and booted to usb. To do this press f12 when you turn it on at the initial Acer screen and select the USB stick from the menu. Then once the desktop loads, use the icon on the desktop to install Ubuntu, let it use the entire disk and replace Linpus on your Revo.
3) Once instaled there's some tweeking to be done, first is to fix the wireless card. Open the terminal and type:
sudo gedit /etc/modprobe.d/blacklist.conf
then add the following line to the end of the file:
blacklist rt2800pci
press 'Ctrl + O' to write the file, then 'Ctrl + X' to close it. That's it! the first time you shutdown the machine it'll freeze, when this happens, hold the power button in for 6 seconds and it'll power down suddenly. Press it again to power it on and it shouldn't freeze again now the fix has been applied.
Then apply the updates. Go to System -> Administration -> Update Manager install all updates. It'll take a while. Then go System -> Administration -> Additional Drivers and enable the nvidia driver (recommended). This will require a restart to take effect.
4) next install Boxee. Go to www.boxee.tv and download the version for Ubuntu Linux. Once downloaded install the software.
That's essentially it. You're now ready to go, launch Boxee and add your videos to the library and enjoy watching some videos!
No comments:
Post a Comment